What the Video File Size Calculator does
The Video File Size Calculator estimates the size of an encoded video from three values: its duration, video bitrate, and audio bitrate. It adds the two bitrates, multiplies their combined data rate by the recording time, and converts the result into decimal megabytes. This gives editors, producers, and media teams a quick planning estimate before they export or transfer a finished file.
The calculator assumes that the entered bitrates remain constant throughout the video. It reports Estimated File Size in MB, where one MB is treated as 1,000,000 bytes. The estimate covers the encoded audio and video streams. It does not inspect footage, read an existing file, or measure codec behavior. Its result is therefore a planning figure based on the inputs, not a prediction of every detail in a finished media file.
For example, a ten-minute video at 8 Mbps video bitrate with 192 kbps audio is estimated at 614.40 MB. The estimate can help when comparing export settings, preparing upload plans, or checking whether a project is likely to fit a storage allocation.
How to use the Video File Size Calculator
Enter the full program duration in minutes. Use the length of the exported sequence, rather than only the amount of usable dialogue or action. If you know the export's video bitrate, enter it in megabits per second (Mbps). Enter the audio bitrate in kilobits per second (kbps). The default values provide a starting example and should be replaced with the settings for your project.
- Duration: Enter the final timeline length in minutes. A value of 12.5 represents twelve and a half minutes.
- Video bitrate: Enter the target average video bitrate in Mbps. Use the value from your export settings when available.
- Audio bitrate: Enter the audio bitrate in kbps. If the export has multiple audio streams, add their bitrates together before entering the value.
- Select calculate to view the estimated size in decimal MB.
Keep the units consistent with the labels. A bitrate written in kilobits per second must be entered as kbps, and video bitrate must be entered as Mbps. If an encoder reports a combined bitrate, separate the audio and video figures when possible, or use the combined total as video bitrate and set audio bitrate to zero. Avoid counting the audio twice.
How the Video File Size Calculator formula works
The formula converts both bitrate inputs into bits per second. Video bitrate in Mbps is multiplied by 1,000,000, while audio bitrate in kbps is multiplied by 1,000. Those values are added to produce the combined stream bitrate. Duration in minutes is multiplied by 60 to convert it into seconds. Multiplying seconds by bits per second gives the total number of bits.
The formula then divides by 8 to convert bits into bytes and by 1,000,000 to convert bytes into decimal megabytes. Together, those two divisors equal 8,000,000. In calculator form, the calculation is:
(duration_minutes × 60 × (video_bitrate_mbps × 1,000,000 + audio_bitrate_kbps × 1,000)) ÷ 8,000,000
Using the default example, the combined rate is 8,000,000 bits per second plus 192,000 bits per second, or 8,192,000 bits per second. Ten minutes is 600 seconds. The calculation is 600 × 8,192,000 ÷ 8,000,000, which equals 614.40 MB.
The calculation is a straightforward bitrate model. It does not apply a codec-specific compression estimate or alter the entered bitrate based on image content. That makes the inputs easy to audit, while also making the assumptions important when interpreting the result.
Use cases for the Video File Size Calculator
A size estimate is useful at several stages of content and media production. Before recording or editing, a team can compare possible delivery bitrates against expected runtime. During export planning, an editor can estimate how a change in bitrate may affect a finished program. For example, doubling a bitrate while holding duration constant doubles the model's estimated stream size.
Production teams can also use the result to prepare storage and transfer plans. A rough estimate helps when deciding how much space to set aside for review copies, archive exports, or files sent to collaborators. For a series, calculate an individual episode and multiply by the number of episodes to form a simple total, remembering that this assumes each episode has the same duration and bitrate.
The estimate can support conversations between editors, producers, and distribution teams by making the relationship between runtime and bitrate visible. It does not decide which bitrate is visually acceptable. That choice depends on the footage, codec, frame size, frame rate, delivery requirements, and quality review.
Other factors to consider when calculating video size
Actual exported file size can differ from this estimate. Some encoders use variable bitrate, which changes the data rate across scenes. A quiet static shot may receive fewer bits than a scene with motion, texture, grain, or visual complexity. In that case, the average bitrate across the complete video matters more than a momentary peak.
Container and metadata overhead also add data. A media file may include indexes, captions, timecode, chapter information, thumbnails, or other streams. Multiple audio tracks and subtitles can increase the final size. For more precise planning, include the bitrate of every stream where known and leave a reasonable allowance for file structure and extra content.
Codec efficiency matters to perceived quality at a given bitrate, but this calculator does not model it. Two exports with the same duration and bitrate can look different if their encoding settings or source material differ. The output should be treated as an estimate of encoded stream data rather than a guaranteed final file size or quality rating.
For the closest practical check, export a short representative section using the intended settings, inspect the resulting file size and image quality, and compare those observations with the estimate. A short sample may not represent a full program if its scenes vary substantially, so the full export remains the best source for the final size.
FAQ
Does the calculator estimate file size from resolution?
No. Resolution is not one of the inputs. The calculator uses duration and the entered bitrates because file size in this model follows the amount of encoded data over time. Resolution can influence an encoder's bitrate choice, but it does not directly appear in this arithmetic.
Should I enter total bitrate or separate audio and video bitrates?
Use separate values when your export settings provide them. If you have only a combined bitrate, enter that total in the video bitrate field and use zero for audio bitrate so the audio rate is not added a second time.
Why can my exported file be larger or smaller?
Variable bitrate, extra streams, container information, and metadata can shift the actual size. The entered bitrates may also represent target values rather than the precise average rate for the entire export.
Are MB and MiB the same?
No. This calculator uses decimal MB, equal to 1,000,000 bytes. MiB uses 1,048,576 bytes. Software may label sizes using either convention, so a displayed figure can differ slightly even when it describes the same byte count.
Can I use this for an upload limit?
Use the result as a planning estimate and leave room for overhead or additional streams. If an upload service enforces a strict limit, check the exported file's actual size before uploading.