The Donner DP-1 Guitar Power Supply review is most relevant to players who want several common pedal voltages from one compact board-mounted unit.
Its ten outputs and included power cables offer a straightforward way to organize compatible effects, with output limits that make checking each pedal’s requirements essential.
Donner DP-1 Review Summary
The quick verdict

7,000+ ratings
Read Amazon ReviewsDonner DP-1 Guitar Power Supply
A compact multi-output supply for guitarists powering a pedalboard with a mix of 9V, 12V, and 18V effects.
- Ten DC outputs: seven 9V outputs at 100mA, one 9V output at 500mA, one 12V output at 100mA, and one 18V output at 100mA.
- AC input range of 100V–240V, with an 18V DC input to the supply.
- Ten power cables are included for connecting compatible effects.
- Independent short-circuit protection is designed to keep other outputs operating if one output shorts.
Pros
- Ten outputs provide a useful selection of common pedal voltages.
- The dedicated 500mA 9V output adds capacity for one compatible higher-draw pedal.
Consider before buying
- Most outputs are limited to 100mA, so buyers need to match each pedal’s current draw to the correct output.
- The 12V and 18V outputs are each rated at 100mA, which narrows their fit to pedals compatible with those limits.
Read the full review summary
The DP-1 provides seven 9V outputs rated at 100mA, one 9V output at 500mA, one 12V output at 100mA, and one 18V output at 100mA.
That mix can suit a small or medium board whose pedals match those voltages and current limits, while the aluminum enclosure and compact rectangular form keep the supply focused on practical pedalboard use.
Its independent short-circuit protection is designed so that a short on one output does not stop the others from working. Donner also describes a noise-reduction circuit and a blue LED for lighting and short-circuit indication.
The supply is a sensible option when its specific output map matches your setup; players with pedals requiring other voltages or more current should check compatibility before buying.
The buying factors
Donner DP-1 Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Output variety
Ten outputs cover 9V, 12V, and 18V operation, including one higher-current 9V output.
Output capacity
The defined 100mA and 500mA limits suit compatible pedals, but each pedal’s draw needs checking.
Board convenience
A compact aluminum unit and ten included power cables make multi-pedal wiring more convenient.
Fault containment
Independent short-circuit protection is intended to let unaffected outputs continue working if one output shorts.
Voltage flexibility
Three output voltage options are useful, provided they match the requirements of the pedals being powered.
Setup visibility
A blue LED provides an indicator and some pedalboard lighting, though its brightness may not suit every setup.
Key Features and Specifications of Donner DP-1
- Ten DC outputs: seven 9V outputs at 100mA, one 9V output at 500mA, one 12V output at 100mA, and one 18V output at 100mA.
- AC input range of 100V–240V, with an 18V DC input to the supply.
- Ten power cables are included for connecting compatible effects.
- Independent short-circuit protection is designed to keep other outputs operating if one output shorts.
- Aluminum alloy enclosure in a compact rectangular form.
- Blue LED indicates the unit and is intended to provide pedalboard lighting and short-circuit indication.
Pros and Cons of Donner DP-1
Pros
- Ten outputs provide a useful selection of common pedal voltages.
- The dedicated 500mA 9V output adds capacity for one compatible higher-draw pedal.
- Independent short-circuit protection can help isolate an output fault from the rest of the board.
- Ten included power cables simplify getting several pedals connected.
Consider before buying
- Most outputs are limited to 100mA, so buyers need to match each pedal’s current draw to the correct output.
- The 12V and 18V outputs are each rated at 100mA, which narrows their fit to pedals compatible with those limits.
- Donner describes the outputs as isolated through circuit simulation and design, while clarifying that this does not mean absolute circuit isolation.
Who Should Buy Donner DP-1?
Good fit
Consider the DP-1 if your board has several pedals that accept 9V, 12V, or 18V DC and their current requirements fit the listed output ratings.
Before connecting anything, check the pedal’s power requirements and connector polarity against the supply and cable arrangement.
It is especially practical when you want a single supply for multiple effects and value a mix of output voltages, an aluminum enclosure, and ten included cables.
The 500mA 9V output gives you one option for a compatible pedal with a higher current draw than the 100mA outputs allow.
Who should skip it
Look for another supply if your pedals require output voltages or current levels outside the DP-1’s listed ratings. A board with several high-draw effects may also need more than its single 500mA 9V output can provide.
If absolute circuit isolation is a deciding requirement, review the power design carefully before choosing this unit, since the stated isolation effect is not described as absolute.
Donner DP-1 Guitar Power Supply review: what the output layout means
Match every output to its pedal
The DP-1’s output count is useful only when the individual ratings fit the pedals on your board. Seven 9V sockets provide 100mA each, while one 9V socket provides 500mA; the 12V and 18V sockets each provide 100mA.
Check both voltage and current draw for every pedal, then plan which effect uses each output before routing cables.
Use the voltage options deliberately
Having 9V, 12V, and 18V outputs offers flexibility for a board that combines effects with different voltage requirements. Those options are fixed by the listed output map, so they do not replace checking a pedal’s accepted voltage range.
A mismatch can make an otherwise convenient multi-output supply unsuitable for that effect.
Understand the protection and isolation language
Independent short-circuit protection is a useful design feature because the product description says other outputs can continue working when one output shorts.
Donner also explains that its circuit design creates an isolation effect but does not mean absolute isolation. Buyers who depend on a particular isolation standard should confirm that the design meets their needs.
Plan the physical board setup
The compact rectangular aluminum enclosure and ten included power cables support a tidy multi-pedal arrangement. The blue LED is intended to indicate status and add light around the board.
Consider where the unit will sit and whether the cables can reach each pedal cleanly as you map out the layout.
Alternatives to Donner DP-1
The supplied alternative is a pedalboard mounting accessory rather than another power supply. Compare power supplies with an output layout that matches your pedals if you need a direct substitute.
Guitar & Bass Accessories alternative

1,000+ ratings
Read Amazon ReviewsDonner Pedalboard Pedal Tape
Choose the DP-1 when your need is powering multiple effects and its output ratings match your pedals.
Choose the tape when your priority is attaching pedals to a board; it is a mounting accessory and does not provide power.
- This product is 2m long and 50mm wide hook-and-loop pedalboard mounting tape that can be cut to length and attached to pedals.
- The DP-1 is a power supply with ten DC outputs for compatible pedals, including three voltage options.
Is Donner DP-1 Worth It?
The Donner DP-1 is worth considering for a pedalboard with several effects that fit its 9V, 12V, and 18V outputs.
Its ten connections, included cables, and independent short-circuit protection make it a practical option when the output ratings line up with your setup.
Check voltage and current requirements for every pedal before buying, especially if your board includes multiple higher-draw effects or depends on absolute circuit isolation.
If the stated limits fit your needs, the DP-1 offers a compact way to power a varied group of compatible pedals.
Your review at a glance

7,000+ ratings
Read Amazon ReviewsDonner DP-1 Guitar Power Supply
A compact multi-output supply for guitarists powering a pedalboard with a mix of 9V, 12V, and 18V effects.
- Ten DC outputs: seven 9V outputs at 100mA, one 9V output at 500mA, one 12V output at 100mA, and one 18V output at 100mA.
- AC input range of 100V–240V, with an 18V DC input to the supply.
- Ten power cables are included for connecting compatible effects.
- Independent short-circuit protection is designed to keep other outputs operating if one output shorts.